• Excellent oxidation & thermal stability reduces deposits formation in piston under crown and ring belt areas. • Outstanding protection against ring and liner wear. • Excellent protection from rust and corrosion even in presence of water. • Excellent oil filtration and centrifuging capabilities. • High detergency & low dispersancy capabilities, ensures engine cleanliness and releases contaminants & water readily in centrifugal separators. • High TBN reserves & retention, provides rapid neutralization of acidic combustion products and protection against corrosive wear.
• Suitable for lubricating Medium-speed Trunk piston engines in industrial or marine propulsion and auxiliary engines on deep sea vessels, burning on residual fuel oils with
Specifications Eiffel Ocean Guard 30 series meets or exceeds following International and Builder specifications:
Typical Characteristics
| Eiffel Ocean Guard | Test Method | Units | 3030 | 3040 | 3050 |
|---|---|---|---|---|---|
| SAE Grade | — | — | 30 | 40 | 50 |
| Density @ 15 0C | ASTM D 4052 | gm/cc | 0.892 | 0.900 | 0.904 |
| Viscosity @ 100 0C | ASTM D 445 | cSt | 11.6 | 14.6 | 19.2 |
| Viscosity @ 40 0C | ASTM D 445 | cSt | 103 | 145 | 218 |
| Viscosity Index | ASTM D 2270 | – | 100 | 99 | 99 |
| Pour Point | ASTM D 97 | °C | -9 | -9 | -9 |
| Flash Point (COC) | ASTM D 92 | °C | 245 | 268 | 276 |
| Total Base Number | ASTM D 2896 | mg KOH/g | 30.0 | 30.0 | 30.0 |
| Sulphated Ash | ASTM D 874 | wt% | 3.7 | 3.7 | 3.7 |
The above figures are typical of blends with normal production tolerance and do not constitute a specification.
