• High thermal & oxidation stability protects against deposit formation and oil thickening, thus enhances the life and performance of lubricant. • Excellent protection from bearing wear and high load carrying property extends the life of components. • Excellent gear protection from micropitting & scuffing and outstanding extreme pressure performance. • Excellent rust and corrosion protection for longer component life. • Compatible with elastomer seals and gaskets, leads to minimum leakage and reduced contamination. • Excellent demulsifying properties, low foaming and good air release characteristics
Specifications Eiffel Axel Ind Gear series meets or exceeds following International and Builder specifications:
Typical Characteristics
| Eiffel Axel Ind Gear | Test Method | Units | 46 | 68 | 100 | 150 | 220 | 320 | 460 | 680 |
|---|---|---|---|---|---|---|---|---|---|---|
| AGMA 9005 | – | – | – | 2 EP | 3 EP | 4 EP | 5 EP | 6 EP | 7 EP | – |
| ISO Viscosity Grade | ISO 3448 | – | 46 | 68 | 100 | 150 | 220 | 320 | 460 | 680 |
| Density @ 15 0C | ASTM D 4052 | gm/cc | 0.878 | 0.880 | 0.887 | 0.894 | 0.898 | 0.900 | 0.904 | 0.910 |
| Viscosity @ 40 0C | ASTM D 4052 | cSt | 46.8 | 68.9 | 100.8 | 150.2 | 220.5 | 320.9 | 460.8 | 680.5 |
| Viscosity @ 100 0C | ASTM D 4052 | cSt | 6.78 | 8.72 | 11.15 | 14.56 | 18.75 | 23.95 | 30.45 | 37.85 |
| Viscosity Index | ASTM D 2270 | – | 98 | 98 | 95 | 95 | 95 | 95 | 95 | 92 |
| Pour Point | ASTM D 97 | °C | -27 | -27 | -24 | -24 | -24 | -24 | -15 | -12 |
| Flash Point (COC) | ASTM D 92 | °C | 216 | 218 | 226 | 238 | 248 | 248 | 256 | 282 |
| FZG Scuff Fail Stage | A/8.3/90 | – | 12+ | 12+ | 12+ | 12+ | 12+ | 12+ | 12+ | 12+ |
| Timken OK Load | ASTM D 2670 | lb/kgf | 65 | 65 | 65 | 75 | 75 | 75 | 75 | 75 |
| Cu Strip Corrosion | ASTM D 130 | – | 1B | 1B | 1B | 1B | 1B | 1B | 1B | 1B |
| Rust Test-Proc B | ASTM D 665 | – | Pass | Pass | Pass | Pass | Pass | Pass | Pass | Pass |
| Foam Seq I,II,III | ASTM D 892 | ml/ml | 0/0 | 0/0 | 0/0 | 0/0 | 0/0 | 0/0 | 0/0 | 0/0 |
The above figures are typical of blends with normal production tolerance and do not constitute a specification.
