fbpx
Eiffel Axel Ind Gear series of lubricants are supreme performance industrial gear oils, formulated with high quality base stocks fortified with sulfur-phosphorus additive system. They are designed to work efficiently in all types of enclosed gear drives with circulation or splash lubrication systems, where outstanding extreme pressure characteristics (EP/AW properties), extremely high load carrying capability and excellent demulsifying properties are desired. Moreover they offer extremely high protection against micropitting, wear and corrosion in enclosed gears and all types of oil lubricated bearings. Suitable for use in large & small spur bevel, spiral, helical & herringbone gears.
  • High thermal & oxidation stability protects against deposit formation and oil thickening, thus enhancing the life and performance of the lubricant.
  • Excellent protection from bearing wear and high load-carrying property extends the life of components.
  • Excellent gear protection from micro pitting & scuffing and outstanding extreme pressure performance.
  • Excellent rust and corrosion protection for longer component life.
  • Compatible with elastomer seals and gaskets, leads to minimum leakage and reduced contamination.
  • Excellent demulsifying properties, low foaming, and good air-release characteristics

Specifications Eiffel Axel Ind Gear series meets or exceeds following International and Builder specifications:

  • DIN 51517-3 (CLP)
  • ISO 6743-6 & ISO 12925-1 (CKC/CKD)
  • US Steel 224
  • David Brown
  • Flender BA 7300, table A
  • David Brown S1.53.101

Typical Characteristics

Eiffel Axel Ind Gear Test Method Units 46 68 100 150 220 320 460 680
AGMA 9005 2 EP 3 EP 4 EP 5 EP 6 EP 7 EP
ISO Viscosity Grade ISO 3448 46 68 100 150 220 320 460 680
Density @ 15 0C ASTM D 4052 gm/cc 0.878 0.880 0.887 0.894 0.898 0.900 0.904 0.910
Viscosity @ 40 0C ASTM D 4052 cSt 46.8 68.9 100.8 150.2 220.5 320.9 460.8 680.5
Viscosity @ 100 0C ASTM D 4052 cSt 6.78 8.72 11.15 14.56 18.75 23.95 30.45 37.85
Viscosity Index ASTM D 2270 98 98 95 95 95 95 95 92
Pour Point ASTM D 97 °C -27 -27 -24 -24 -24 -24 -15 -12
Flash Point (COC) ASTM D 92 °C 216 218 226 238 248 248 256 282
FZG Scuff Fail Stage A/8.3/90 12+ 12+ 12+ 12+ 12+ 12+ 12+ 12+
Timken OK Load ASTM D 2670 lb/kgf 65 65 65 75 75 75 75 75
Cu Strip Corrosion ASTM D 130 1B 1B 1B 1B 1B 1B 1B 1B
Rust Test-Proc B ASTM D 665 Pass Pass Pass Pass Pass Pass Pass Pass
Foam Seq I,II,III ASTM D 892 ml/ml 0/0 0/0 0/0 0/0 0/0 0/0 0/0 0/0

The above figures are typical of blends with normal production tolerance and do not constitute a specification.

You May Also Like

Need Help?